|
|
Study of thermal properties of selected coloids
Křivánková, Kateřina ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
The bachelor thesis is focused on the study of the thermal properties of colloidal systems, especially the properties of emulsions (water, oil), which can be used in the cosmetic industry as an essential component of various lotions and creams and in the food industry. In the introduction the first defined thermo-physical processes (conduction, convection and radiation) and temperature measurement (stationary, transient). Furthermore defined physical parameters (heat and thermal conductivity, heat capacity), that are determined using transient methods. The measured data were collected and analyzed by using the EMA (Electrical Measurement Analyser) and the HarFA (Harmonic and Fractal Image Analyser). The results will be used to determine the optimum conditions for the production of cosmetics and dietary supplements.
|
|
|
Optimalisation of thermal properties of solar cell modules
Dohnalová, Lenka ; Matiašovský, Peter (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented diploma thesis is study of thermal properties structures of photovoltaic cells. The main goal of this thesis is study of ways of heat spreading from volume and planar materials (conduction, convection and radiation). Then it is needed to determine contributions of heat spread from laminated photovoltaic cell and compare them to results measured by transient pulse method, step wise method and with thermo-camera using. At the beginning of this thesis it will be needed to define heat and ways it’s spread. Heat is closely connected with temperature. That is reason why will be there spoken about temperature and methods of its measuring. Than there will be defined basic thermo-physical parameters of materials. Thermo-physical parameters of materials will be measured by transient methods that will be characterized later and by thermo-camera. This thesis deals with photovoltaic cells, so there will be described their structure, properties, utilization and way of their production. Subsequently after the definition of all needed terms the experimental part of this thesis will be introduced. It will be needed to characterize measured volume material and define its thermo-physical parameters. Using the pulse transient method, step wise method and thermo-camera there will be measured the thermal response of PMMA sample, nonlaminated photovoltaic cell and also samples of laminated photovoltaic cells. Findings of all described methods will be finally compared.
|
|
|
Characterization of perovskite solar cell materials by transient techniques
Nakládal, Martin ; Zmeškal, Oldřich (referee) ; Novák, Vítězslav (advisor)
This thesis deals with the study of the lifetime of charge carriers in perovskite single crystals. The principle of perovskite solar cells is formulated, their main structures are characterized and the history of the development of perovskite solar cells is summarized, especially in terms of efficiency. The properties of perovskite single crystals with perovskite solar cells are compared. For measurement purposes, transient methods, impedance spectroscopy, load characteristics and the dependence of sensitivity and photocurrent on the wavelength of incident radiation are described. The practical part deals with the method of measuring and evaluating the lifetime of charge carriers in the investigated perovskite single crystals.
|
|
|
Study of thermal properties of phase change materials
Křivánková, Kateřina ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
The diploma thesis studies the thermal properties of materials, heat storage based on phase transformation. The aim of this study was to measure the thermal properties of materials using a heat accumulation phase transformation, particularly a commercial material available from the Phase Change Material Products Ltd. under the name PlusICE A118. Such materials are referred to as PCM (from Eng. Phase Change Material), and are used for instance as heat insulators in construction. First described the phase transformation of substances in general, then was defined accumulation of thermal energy. We have also described methods for determining the temperature (thermal analysis, stationary and transietní methods). Finally defined thermophysical parameters (thermal capacity, thermal conductivity, thermal conductivity), which were determined transient step method.
|
|
|
Characterization of perovskite solar cell materials by transient techniques
Nakládal, Martin ; Zmeškal, Oldřich (referee) ; Novák, Vítězslav (advisor)
This thesis deals with the study of the lifetime of charge carriers in perovskite single crystals. The principle of perovskite solar cells is formulated, their main structures are characterized and the history of the development of perovskite solar cells is summarized, especially in terms of efficiency. The properties of perovskite single crystals with perovskite solar cells are compared. For measurement purposes, transient methods, impedance spectroscopy, load characteristics and the dependence of sensitivity and photocurrent on the wavelength of incident radiation are described. The practical part deals with the method of measuring and evaluating the lifetime of charge carriers in the investigated perovskite single crystals.
|
|
|
Study of thermal properties of phase change materials
Křivánková, Kateřina ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
The diploma thesis studies the thermal properties of materials, heat storage based on phase transformation. The aim of this study was to measure the thermal properties of materials using a heat accumulation phase transformation, particularly a commercial material available from the Phase Change Material Products Ltd. under the name PlusICE A118. Such materials are referred to as PCM (from Eng. Phase Change Material), and are used for instance as heat insulators in construction. First described the phase transformation of substances in general, then was defined accumulation of thermal energy. We have also described methods for determining the temperature (thermal analysis, stationary and transietní methods). Finally defined thermophysical parameters (thermal capacity, thermal conductivity, thermal conductivity), which were determined transient step method.
|
|
|
Optimalisation of thermal properties of solar cell modules
Dohnalová, Lenka ; Matiašovský, Peter (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented diploma thesis is study of thermal properties structures of photovoltaic cells. The main goal of this thesis is study of ways of heat spreading from volume and planar materials (conduction, convection and radiation). Then it is needed to determine contributions of heat spread from laminated photovoltaic cell and compare them to results measured by transient pulse method, step wise method and with thermo-camera using. At the beginning of this thesis it will be needed to define heat and ways it’s spread. Heat is closely connected with temperature. That is reason why will be there spoken about temperature and methods of its measuring. Than there will be defined basic thermo-physical parameters of materials. Thermo-physical parameters of materials will be measured by transient methods that will be characterized later and by thermo-camera. This thesis deals with photovoltaic cells, so there will be described their structure, properties, utilization and way of their production. Subsequently after the definition of all needed terms the experimental part of this thesis will be introduced. It will be needed to characterize measured volume material and define its thermo-physical parameters. Using the pulse transient method, step wise method and thermo-camera there will be measured the thermal response of PMMA sample, nonlaminated photovoltaic cell and also samples of laminated photovoltaic cells. Findings of all described methods will be finally compared.
|
|
|
Study of thermal properties of selected coloids
Křivánková, Kateřina ; Krouská, Jitka (referee) ; Zmeškal, Oldřich (advisor)
The bachelor thesis is focused on the study of the thermal properties of colloidal systems, especially the properties of emulsions (water, oil), which can be used in the cosmetic industry as an essential component of various lotions and creams and in the food industry. In the introduction the first defined thermo-physical processes (conduction, convection and radiation) and temperature measurement (stationary, transient). Furthermore defined physical parameters (heat and thermal conductivity, heat capacity), that are determined using transient methods. The measured data were collected and analyzed by using the EMA (Electrical Measurement Analyser) and the HarFA (Harmonic and Fractal Image Analyser). The results will be used to determine the optimum conditions for the production of cosmetics and dietary supplements.
|
guest ::
